Our most aggressive traction improvement product. Tuff Grip can be used inside or outside to make any floor anti-skid. Popular uses are on loading ramps, roof top walkways, warehouse floors, garage floors, etc. It's a maximum grip coating that's environmentally and user friendly. Tuff Grip's flexibility is chip, scuff and impact resistant. To apply, roll on the coating with a textured roller, and a textured surface is created! The coating air dries quickly. It is NON FLAMMABLE, CONTAINS NO SILICA, and is a ZERO VOC product. Now available in CLEAR!

One gallon covers up to 100 SF/Gal in 2 coats.

Very effective on wood steps. Designed for resilient and wood flooring. Can be used indoors or outdoors. Dries in less than 30 minutes! This product will not adhere to fiberglass or acrylic. See product data sheet for additional surfaces.

One can covers up to 20 Sq Ft.

Our exclusive roll-on coating is a clear water based acrylic sealer. It's designed for applications on all interior vinyl, painted surfaces, and concrete. Floor Grip leaves a clear gloss "wet" look. You can add 20% water for a matte finish. Once mixed with our additive, it will leave a durable high traction surface. (Additive Included) Not for use around pools.

One gallon covers 250-400 square feet.

Our same great Stone-Grip product is now offered in a Quart size container. Perfect size for those slippery shower tiles. Will work on any tiles found in showers. Our best seller. (Instructions included with each order.) Use our spray coating below for fiberglass or acrylic showers. 

One quart will treat between 50 - 75 Sq. Ft.

Very effective on wood steps. Designed for resilient and wood flooring. Can be used indoors or outdoors. Dries in less than 30 minutes! This product will not adhere to fiberglass or acrylic. See product data sheet for additional surfaces.

One can covers up to 20 Sq Ft.

Our same fiberglass solution is now available in white! The white color works great on all tubs or showers. Using a white spray allows you to see the slip-resistant surface. Can be used in bathtubs, showers, boats, stairs, etc. Certified by Professional Bathtub Refinishers Association and recommended by many boat refinishers.

One can covers up to 15 Sq Ft.

The ONLY non-slip clear aerosol spray for Fiberglass found on the market! This spray coating is long lasting, slip resistant, and easy to apply. Our clear epoxy coating can be used on bathtubs, showers, boats, stairs, etc.

One can covers up to 15 Sq Ft

An exclusive "ALL IN ONE" treatment kit. Easy to install. Takes 10 minutes! After one simple treatment, you can relax that your shower and bath are slip-resistant. So-long to that nasty bath mat! This product has been used across the nation at many large hotel chains. Not for use on Fiberglass Tubs.

One kit covers one bathtub or shower.

Perfect for use around pools and spas. Deck-O-Grip is a non-yellowing, water-based polymer deck treatment. This product is clear and easy to apply. Chemical resistant to salts and chlorines. It is specifically designed to retain and enhance the appearance of any concrete, exposed aggregate, slate, pavers or any porous surface. Also available in 5 Gallon drums.

One gallon covers 300-600 square feet.

Our exclusive roll-on coating is a clear water based acrylic sealer. It's designed for applications on all interior vinyl, painted surfaces, and concrete. Floor Grip leaves a clear gloss "wet" look. You can add 20% water for a matte finish. Once mixed with our additive, it will leave a durable high traction surface. (Additive Included) Not for use around pools.

One gallon covers 250-400 square feet.

Our same great Stone-Grip product is now offered in a Quart size container. Perfect size for those slippery kitchens, entry areas or bathrooms. Our best seller. (Instructions included with each order.)

One quart will treat between 50 - 75 Sq. Ft.

Stone-Grip will dramatically increase traction and improve safety on wet and dry stone floors. The slip resistance will surpass guidelines recommended by ADA/OSHA for floor safety. It is easy to use. To treat, first clean and dry the flooring. Next, apply the treatment and rinse off. You're finished! (Instructions included with each order.) *NOT for use on synthetic tiles*

One gallon will treat approximately 400 Sq. Ft.